Search Results

AMS2980/1 gives information about the technical requirements and qualification procedure for carbon fiber fabric and epoxy resin systems used for wet lay-up repair of carbon fiber reinforced epoxy structures.

This SAE Aerospace Recommended Practice (ARP) describes standard methods for drying commercial aircraft composite structures prior to repair and gives general guidelines on use and applicability. It addresses the removal of liquids that have collected inside the structures through open damage, microcracks, or porosity and the removal of absorbed moisture from the composite material. The methods described in this document shall only be used when specified in an approved repair document or with the agreement of the original equipment manufacturer (OEM) or regulatory authority. If this document is used for the drying of materials other than thermosetting composite materials, the fitness for this purpose must be determined by the user.

To create Guidance on the essential information/data that is needed to correctly assess damage and document the damage. A guidance document is proposed as the initial step in which it is documented what essential information is required for a composite repair with the aim to reduce to number of back and forward communications, improve the documents to define damage such as mapping, damage descriptions, sketches, pictures. CACRC Procedures Task Group will be drafting the document.

AMS6885/2 gives specific information about the qualification program for unidirectional carbon fiber tape epoxy repair prepreg capable of curing under vacuum for repair of carbon fiber reinforced epoxy structures. The prepreg system shall include an epoxy film adhesive to be applied in a co-bonding process with the prepreg for solid laminate and sandwich bonding.

This document (Technical Specification) gives information about qualification rules and the relation between the different specification parts involved, such as the Technical Specification (TS), the Material Specification (MS), and the Purchasing Specifications (PS).

AMS6885/1 gives information about the technical requirements and qualification procedure for unidirectional carbon fiber tape epoxy repair prepreg capable of curing under vacuum for repair of carbon fiber reinforced epoxy structures. The repair system includes an epoxy film adhesive to be applied in a co-bonding process with the prepreg for solid laminate and sandwich bonding.

This Purchasing Specification, AMS6885/3, specifies the batch release and delivery requirements for unidirectional carbon fiber tape epoxy prepreg used for repair. This specification is applicable only when the unidirectional carbon fiber tape epoxy prepreg is used as part of the repair system defined in AMS6885 and AMS6885/1. This specification also defines the procedure and requirements for storage life extension of materials purchased against this specification. It is only applicable for materials qualified against AMS6885 (refer to PRI-QPL-AMS6885) and shall be carried out within the responsibility of the purchaser and under control of its Quality organisation.

This Purchasing Specification, AMS6885/4, specifies the batch release and delivery requirements for film adhesive used for repair. This specification is applicable only when the film adhesive is used as part of the repair system defined in AMS6885 and AMS6885/1. This specification also defines the procedure and requirements for storage life extension of materials purchased against this specification. It is only applicable for materials qualified against AMS6885 (refer to PRI-QPL-AMS6885), and shall be carried out within the responsibility of the purchaser and under control of its Quality organisation.

AMS6885/5 is the Material Specification (MS) which defines the requirements of a unidirectional carbon fiber tape epoxy repair prepreg capable of curing under vacuum for repair of carbon fiber reinforced epoxy structures. It also defines the requirements of an epoxy film adhesive to be applied in a co-bonding process with the prepreg for solid laminate and sandwich bonding.

This SAE Aerospace Information Report (AIR) is intended to be used as a process verification guide for evaluating implementation of key factors in repair of metal bond parts or assemblies in a repair shop environment. This guide is to be used in conjunction with a regulatory approved and substantiated repair, and is intended to promote consistency and reliability.

Individuals who complete the applicable modules aligned with this training document will be able to define the type of damage, define the extent of damage, determine if further inspection is required, evaluate the damage against published allowable damage limits, and provide accurate documentation of the damage. The intended outcome of the training is increased safety such that no aircraft is released with unknown damage and that the aircraft meets continued airworthiness requirements. The goal is to change the culture from damage discovery to damage reporting while also reducing or eliminating flight delays due to incorrect or insufficient information. Teaching levels have been assigned to the curriculum to define the knowledge, skills, and abilities graduates will need. Minimum hours of instruction have been provided to ensure adequate coverage of all subject matter including lecture and practical exercise.

This SAE Aerospace Recommended Practice (ARP) describes methods of masking and cleaning commercial aircraft, epoxy and polyester matrix, composite parts prior to their entry into the composites shop, masking and cleaning of on-wing repair areas in preparation for carrying out repairs and wipe cleaning during repair and prior to bonding. It this document is used for the masking or cleaning of materials other than epoxy and polyester matrix thermosetting composite materials, the fitness for this purpose must be determined by the user.

The methods of masking and cleaning described in this document have specific limited application and are not interchangeable. The methods shall only be used when specified in an approved repair procedure or with the agreement of the Original Equipment Manufacturer (OEM) or regulatory authority.

This document is intended to provide guidance towards setting up a composite repair workshop facility

SAE CACRC has produced several standards, each representing the best-practice, recommended minimum training syllabus for the aforementioned target groups. The purpose of this document is to promote the use of these SAE standards, particularly for developing training programs for employee training, qualification in airlines and maintenance organizations, and as reference in regulatory guidance material. It summarizes, as a quick reference, the content of each training document and its relation to and interaction with other training documents. Thereby it allows users to select the appropriate training documents and syllabi to establish a comprehensive, sequential training program build-up customized to the specific needs of the aforementioned functions (see figure). This document does not intend to introduce new training content/syllabus.

This Technical Specification gives information about technical requirements and qualification procedures of adhesive paste with or without thickening agent for core restoration of aircraft components.

It is recognized that the structural integrity of repaired composite structures depends upon the capabilities of the individuals who are responsible for performing the repairs. This document is intended to address repairs of composite structure regardless of the type of structure such as marine, wind turbine, automotive, aircraft, or other applications. This certification standard establishes the minimum requirements for training, examining, and certifying composite structure repair personnel. It establishes criteria for the certification of personnel requiring appropriate knowledge of the technical principles underlying the composite structural repairs they perform. Persons certified under this document may be eligible for licensing or certification/ qualification by an appropriate authority, in addition to this industry accepted basic composite repair technician certification.

This document establishes the minimum curriculum requirements for training, practical assessments, and certifying composite structure repair personnel and metalbond repair personnel. It establishes criteria for the certification of personnel requiring appropriate knowledge of the technical principles underlying the composite structural repairs and/or metalbond they perform. Persons certified under this document may be eligible for licensing/certification/qualification by an appropriate authority, in addition to this industry accepted technician certification. Teaching levels have been assigned to the curriculum to define the knowledge, skills, and abilities graduates will need to make repairs to composite or metalbond structure. Minimum hours of instruction have been provided to ensure adequate coverage of all subject matter including lecture and laboratory.

This document is to be used as a checklist by curriculum developers to create courses or training for critical composite repair, maintenance, and overhaul issues. This document will not take the place of courses or training requirements for specific job roles of a composite repair technician, inspector or engineer.

Increased use of advanced composite structural materials on aircraft has resulted in the need to address the more demanding quality and non-destructive testing procedures. Accordingly, increased utilization of solid laminate composites is driving changes to airline NDT training requirements and greater emphasis on the application of accurate NDT methods. Modules, including an introduction to composite materials, composite NDI theory and practice, special cases and lessons learned, have been produced in addition to various hands-on NDT exercises. A set of proficiency specimens containing realistic composite structures and representative damage has been designed in order to reinforce teaching points of the course and “test” inspector’s proficiency. Extensive details of the course modules, hand-on exercises and the proficiency specimens are all presented in this report.

This SAE Aerospace Information Report (AIR) offers information about the use of support tooling for composite repair processes, as well as descriptions of some of the different tooling materials used and their applications. If the repair document requires the use of tooling, refer to this AIR for additional information.